Valspar 82092C Natural Look Waterproofer, 3.78 Litres

Valspar Natural Look Waterproofer forms a long lasting, waterproofing seal on concrete, brick, masonry, natural stone, and pavers. This penetrating formula protects against the sun's powerful rays, damaging weather, water, petrol, and de-icing salts.

• Size: 3.78 Litre
• Flash Point: 250 deg F
• Application Temperature – 50-90 °F
• Clear waterproofing sealer for driveways, sidewalks, pavers, and patios
• Protects from sun, water, and household-chemical damage
• Resists petrol, oil, and de-icing salts
• Durable protection while maintaining the beauty of concrete
• Does not change the natural appearance of the surface.

Where To Use

• Exterior aggregate, concrete, brick, pavers, masonry, mortar and flagstone. Do not use on garage floors.

Preparing Your Surfaces

• General: All surfaces must be clean, dry, and free of all loose, peeling paint, or contaminants. Bare concrete: Allow 60 days minimum for new concrete to cure before sealing. Previously sealed surfaces: Clean with an all-purpose cleaner (TSP or substitute). Previously sealed surfaces must be porous and able to accept additional sealer. Test surface porosity before sealing: Avoid using this product on nonporous, sealed surfaces. To test, place a few drops of water on the surface. If water sinks in, the surface is porous enough to use this finish. If water remains on the surface, do not use.