New Arrivals/Restock

Seco-Larm EV-Y6501-A3WQ 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera

flash sale iconLimited Time Sale
Until the end
03
04
16

$37.12 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $74.25
quantity

Product details

Management number 205060668 Release Date 2025/10/16 List Price $37.13 Model Number 205060668
Category
  • 5MP Resolution
  • 1/2.8” 5MP Sony CMOS
  • Joystick OSD Control
  • ICR Module
  • 2DNR (2D Digital Noise Reduction)
  • D-WDR (Digital Wide Dynamic Range)
  • 3.7mm Covert pinhole lens
  • 18 Covert IR LEDs for discreet monitoring
  • Camera is hidden in a non-functioning PIR sensor housing

 

Specifications

Formats TVI (Default) / CVI / AHD / Analog
CMOS 1/2.8″ 5MP Sony CMOS
Resolution (HD) 2592×1944, 1440p
2DNR Yes
D-WDR Yes
OSD (On-Screen Display) Yes
Cable OSD control Yes
Megapixels 5MP
Lens 3.7mm Pinhole Lens
Viewing Angle 120°
# of IR LEDs 18 Covert (940nm)
IR Range Up to 50ft (15m)
FPS 20FPS
F Stop 2.2
Minimum illumination – IR On 0.1 Lux
Minimum illumination – IR Off 0.01 Lux
S/N Ratio >50dB
Shutter control AES (Auto Electric Shutter), 1/60~1/50,000 s
Gain control Yes
Operating voltage 80mA@12VDC
IP Rating IP65
Operating temperature -4°~140° F (-20°~60° C)
Dimensions 4-1/16″x2-3/8″ x1-5/16″ (104x60x34 mm)
Weight 12.3-oz (350g)

 

Troubleshooting

The screen is black
  •  Check that the camera is powered up.
  • Check that the power supply’s polarity is correct.
  • Check that the monitor is powered up.
  • Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
  • Clean the lens using a soft, clean cloth.
  • Check that the light source is adequate.
The screen has poor contrast
  • Adjust the monitor’s contrast knob
  • Change the position of the camera
The screen image flickers
  • Change the position of the camera, check cables and format setting
The screen image is distorted.
  • Change the position of the camera, check cables and format setting
The camera case is hot
  • Check that the correct power supply is in use
The image is foggy or washed out at night
  • Check that there are no objects very close to the camera
  • Check that there are no highly reflective objects in the scene
IR LEDS do not turn on
  • Check that the correct power supply is in use

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review