High Lifter Polaris Ranger 1000 Standard Cab/Crew 30% Dual Idler 4'' Portal Gear Lift

What does the Dual Idler Gear Lift offer?

• High Lifter improved the portal design by adding a second idler gear in the gear box
• The dual idler gears spread the load over twice as many teeth on the gear sets, which doubles the area and reduces stress by half.
• You gain more reliable torque transfer
• If you run a 40" tire or larger, this is the ideal gear ratio and the dual idler gears are almost a must
• Stop burning up belts and breaking so many axles; differentials; drive shafts; snorkel gears…
• Gear reduction extends brake life by needing brakes less often due to greatly improved engine braking
• Even though a lower gear ratio will get your speedometer closer to a stock reading, that is still too high a gear to offset the loss of torque caused by the larger tires. If you don't have a need to run fast, a lower ratio performs better and give you the power you want!

New Features:

• Forged Gear Boxes Stronger than Billet and Cast
  
• Strongest Backing Plate Made
  
• Advanced Sealing with Kevlar Fiber Gaskets
  
• Precision Ground Stainless Steel Rotors
  
• 100% More Sealing Surface
  
• Vented Gear Box

Features:

• 30% Gear Reduction – Gives you greater low-end torque for the trail
  
• Power on Tap – More power to the ground with less engine wind up
  
• Lift It Up – Gain additional 4" lift plus improved track width
  
• Built Tough – Built with 6061 Aluminum and designed for the toughest terrain you can throw at them
  
• Great Ride – Get all the benefits of added torque and better clearance without compromising factory ride or suspension angles
  
• Camber adjusting shims – Adding or removing shims can adjust camber by -1.25° to a +2°
  
• Perfect Machining – We stand behind the quality of our product 100%.
• The kits have been specially designed and machined to fit your ride perfectly
  Slotted Brake Rotors – Slots carved into the flat metal surface move gas, heat and water away from the surface of these rotors to improve braking performance

Tire Fitment:

• Largest Tire with Portal: 33"
  
• Largest Tire with Forward Arms: 35"
  
• Our stated tire fitment guide is a general fitment and is in no way guaranteed.
• Tires and lifts vary by manufacture and tire fitment can be affected by other modifications.
• Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Wheel Requirements:

• 14" or larger
  
• 14" factory wheels must run 1" spacer
  
• 14" & 15" can not exceed 4-1/2" backspacing
  
• 16" & larger can not exceed 5" backspacing

Dimensions:

• Weight: 250.000000
• Length: 48.000000
• Width: 40.000000
• Height: 36.000000

Installation Instructions:

Portal Gear Lift