Biamp H10 Compact Compression Horn Loudspeaker

Biamp H10 Compact Compression Horn Loudspeaker

The H10 is a compact industrial compression driver horn. It offers high sound pressure, which makes this loudspeaker ideally suited for speech and the reproduction of alarm signals. The H10-G is suited for both indoor and outdoor use.

Thanks to its stainless-steel bracket, the H10 will remain truly rust free (IP66). The bracket also makes it possible to rotate the speaker over a range of more than 180 degrees. Because this horn speaker is constructed of high impact ABS, it can withstand even the harshest elements.

The loudspeaker is equipped with a high quality 70/100-volt transformer with several power taps, and can also be used in 8-ohm systems. Our technology avoids any overload of your amplifier by controlling the impedance with the unique IMC protection device inside.

Key Features

• Cost effective voice paging and signal horn
• Rugged construction for industrial applications
• IP66 Indoor/Outdoor ready
• Permanently attached and water-sealed input wire
• Externally accessible 6-position tap switch

Technical Specifications

Operating Mode
Passive with selectable low-impedance or 70 V/100 V operation, Single-amplified with DSP
Operating Environment
Indoor or Outdoor Direct Exposure
Operating Range (-10 dB)
530 Hz to 6.5 kHz
Nominal Beamwidth (H x V)
135 x 135 Degree
Transducer
MF: 1 x 1.4” (36 mm) voice coil compression driver
Sensitivity
@ 1 m
104 dB (2.83 V)
104 dB (1 W, 8 Ω)
Nominal Continuous Power
Handling 4 9 V (10 W, 8 Ω rated Impedance)
Rated Continuous Voltage
8.9 V (19 dBV)
Transformer
70 V: 10 W, 5 W, 2.5 W, 1.25 W, 0.625 W
100 V: 10 W, 5 W, 2.5 W, 1.25 W
Protection
Internal DC-blocking capacitor
Required Accessories
425 Hz, 6 dB / oct. Butterworth high pass filter; DSP preset
Recommended Amplifiers
10 W - 20 W, 8 Ω (9 V - 13 V)
PHYSICAL
Input Connection
2 x 0.3 mm2 conductor 1 m (39.3”) cable
Controls
Wattage / low impedance selector switch
Mounting Provisions
U-Bracket
Compliance
IEC 62368-1 certified
Environmental Rating
IP66 per IEC 60529
Dimensions
H x W x D 140 mm x 140 mm x 193 mm
<5.51” x 5.51” x 7.6”>
Weight (with U-Bracket)
1.17 kg <2.6 lbs>